Question: What Oil To Use On Motor Motorbike?

Can I use 5w30 in my motorcycle?

5w30 Motor Oil It is designed to work at ambient temperature starting from -22 degrees Farhenheit. This makes it a perfect choice for your motorbike if you live in colder regions. You may use it in warm places as well but ensure that the temperature in such areas does not exceed 95 degrees Fahrenheit.

Can you use conventional oil in a motorcycle?

Though it is okay to temporarily use car engine oil in a motorcycle, it’s not okay to consistently use it. As I mentioned before, there are some differences between the two oils and due to those differences, a motorcycle will start lacking some vital components it needs from the oil and will start breaking down.

What weight oil should I use in my motorcycle?

The result is that 10W30 oil has less viscosity than a straight 30 when it’s cold, though not so little as a straight 10 weight, so it’s perfect at the engine’s normal operating temperature. The Beginners Guide to Motorcycle Oils.

You might be interested:  Quick Answer: How To.Ride Motorbike In Snow?
30 Weight 9.3–12.4
40 Weight 12.5-16.2
50 Weight 16.3 –21.8


What happens if you put the wrong oil in your motorcycle?

Oil will not make a clutch wear faster. The additives may make it slip, and that will cause it to wear out (so it is more of a symptom of a problem). If anything, a slipping clutch in car oil will wear slower than a slipping clutch in motorcycle oil.

Is car oil the same as motorcycle oil?

Can I use car oil in a motorcycle? Car oil is designed to work in the engine, with a different oil in the gearbox. You can buy a cheaper car oil with the same viscosity as a motorcycle oil, but it may not have the additives necessary to make stand up in a bike, and it won’t be guaranteed to work with a wet clutch.

Should you use synthetic oil in a motorcycle?

High-performance motorbikes require synthetic oil, while mineral or conventional oils keep the engine clean and running smoother for longer. Semi- synthetic oil is ideal for 125-180 cc medium-sized engines.

Can you use 20w50 instead of 10w40 motorcycle?

The service manual will indicate the oil weight that is appropriate for our engines. Most modern motorcycle engines are designed to use 10w40 or 20w50 for temperature we typically see throughout the year in the Bay Area. I ‘ve run both. The 20w50 won’t make anything quieter, in fact during start-up things got louder.

Can I use 10w40 instead of 10w30 motorcycle?

The lower the number, the better it is able to withstand cold temps. 40 refers to it’s viscosity. 10w40 would be thicker than 10w30. 40 viscosity will work just fine in the bike.

You might be interested:  Quick Answer: How To Pull A Wheelie On A Motorbike Mario Kart Wii?

What is the best 10w40 Motorcycle Oil?

The best 10w40 motorcycle engine oil

  • Castrol 10w40. Castrol’s motorcycle engine oil offering in the 10w40 variety is called Castrol Power 1.
  • Motul 10w40. Motul offer a large selection of 10w40 engine oils for motorcycles in scooters.
  • Shell 10w40. Shell’s motorcycle engine oil range is called ‘Advance’.

Can I use 20w50 oil in my motorcycle?

Based on what I’ve read, the thicker oil ( 20w50 ) is generally not recommended for higher revving bikes like the R1, particularly the Amsoil which supposedly is better suited for V-twins & Harleys (low RPMs, air-cooled & longer oil change intervals) & can adversely impact horsepower / gas mileage.

Can I use JASO MA2 instead of MB?

In my experience, JASO MA1/ MA2 works fine on Scooter. Means JASO MB cab be replaced by JASO MA. Because it just has more anti clutch slippage additive but will not do harm to engine.

Is it OK to use 10w40 instead of 5w30?

One must use the oil specified by the manufacturer. If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Can thick oil damage engine?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

Leave a Comment

Your email address will not be published. Required fields are marked *